It’s Warm(ER)! Go Grill Something!

Posted on March 9, 2015 by Grill Girl

Hello fellow grill fanatics and welcome to the first warm breath of air in 2015! Was this weekend not beautiful!?

I cannot wait to get our grill back into working order for the Spring and Summer seasons! Did you know that right now is the best time to pull out your grill and check it for working parts?

Keep the grill you love in your backyard and out of the landfill this year by replacing the old parts instead of the whole grill! You will save money and, in many cases, end up with a grill that works better than ever!

Here’s your checklist for Grill Spring Cleaning:

Remove cover (carefully) and make sure there are no bugs who used it as their cover over the winter! Don’t have a cover for your grill? You should definitely get one! Covering your grill will help it cook better for longer!
Look on the back of the grill for a model number. This will help immensely as you look for replacement parts on the internet.
Take the cooking grids off your grill and inspect them. Your grid could be cast iron, steel bar, or stainless steel and coated in a variety of things. It might be hard to determine any of that if you have rusting or other corrosion. Clean the grids with a Brass Bristled Brush. If you notice a large amount of rusting or any breakage, put them on your list to replace!
Under the grids you’ll see some system that covers the actual flame of the grill burners. This could be metal heat plates, shields, angles, or another grate that holds briquettes. Drippings and the heat of normal grilling will cause these to discolor and corrode. Since your food doesn’t go on these directly, you don’t need to worry about rust. However, if your heat plates have large holes, are breaking or if your grates don’t hold up the briquettes, it’s time to replace those as well.
Remove the heat plates or briquettes and you should be looking down on the burner system in your grill. With the hood open, light your grill. The burners should each light up and produce a consistent blue flame all along the outside of the burner. If you have any extra large flames, yellow flames, or burners that don’t light fully, you should may need to replace the burners. Any large holes or major corrosion is cause to replace these pieces. If the burners look great, but you’re not getting enough flame, it could be your gas source, valve or regulator.

Call our customer service to help you today! If you can’t find your gas grill model number, measure the parts you need to replace. Our phone number is 877-244-0737.

And as always – Happy Grilling! –GG

Why Isn’t My Grill Getting as Hot as it Used to Get!?

Posted on April 24, 2014 by Grill Girl

Why isn’t my grill getting as hot as it used to get?

This is one of our most frequently asked questions.

For starters – is there gas in your tank? Check that first. 🙂

Once you know you’re cooking with gas, if you use propane (aka LP), the answer is almost always one of the easiest and cheapest things to fix : your gas regulator. Regulators go bad over time, slowly shutting down the amount of gas getting to your grill. That’s why it might not seem like something “broke” all the sudden, but there’s still an issue with the heat in your grill.

Gas grill liquid propane regulators (they fit on those 20lb tanks you buy/trade at grocery stores or gas stations) are a standard part. That means, in almost every case, you can use the regulator we sell for the grill you have. (If you’re not sure, give us a call)

Here’s the standard one-hose-fits-most grills regulator:

Does your grill have two hoses? or a place the the hose goes into a Y shape? We have that too!

How about a really big grill with 4 or more burners?

Or a grill that needs an extra long hose to reach to where the tank sits?

When you order this part and it arrives, you can simply unscrew the old regulator from your tank and your grill. Then screw on the new regulator to your grill and your tank.

See? I told you it was easy to fix.

Why not just go get a new one at a big box store? Well, not all parts are created equal, and we strive to supply the best quality available. We stock regulators in high quantities, so they should always be ready to ship out as soon as you place your order. If they aren’t, you’ll see that listed directly on the website.

We’ll save you a trip now by sending this part directly to your front door, and a trip in a year, because our parts outlast the generic ones sold at big box stores. (More questions about regulators? Read this post)

Still having issues with the heat in your grill? Check out this page for valve information.

It might be your grill burner.

And as always, if you have ANY questions give us a call! We specialize in Great Customer Service! 877-244-0737

-GG

How to Replace the Carry Over Tubes – with video

Posted on April 17, 2014 by Grill Girl

Hey Y’all, it’s the Grill Girl!

Today, we’re going to be replacing the carryover tubes on a Charbroil 463268606.

I’ve already removed all the grill parts except for the burners and carryover tubes. Unfortunately, you’ll see this carryover tube has already removed itself.

So, these are the carryover tubes, and as I already said, this one is missing. This piece has completely rusted out and it just fell right to the bottom of the grill.

The purpose of a carryover tube is to carry the lit gas from one burner to the next. so, when you turn this burner on and light it, then the lit gas will go into the next burner and light it.

It’s really just something to make it easier to grill – you don’t even have to have it to grill. You can light each burner separately.

However, we do sell the replacement for this grill.

You will need to use your own screws, but even if the screw is not completely tight, it will serve the purpose of holding the part in place.

You can see when I turn on this burner, it brings the flame right over – so, it works!

Thanks for watching!!

-GG

Visit GrillPartsSearch.com’s profile on Pinterest.