What’s a Gas Grill Model Number?

Posted on June 19, 2023 by Grill Girl

And How to Find a Model Number

When you look online for replacement parts, or call the friendly sales rep at GrillPartsSearch.com, the first thing you’ll need is your gas grill model number. Having been that friendly rep, I can tell you that if you don’t know what a model number is or where to find it, that makes you and about a million other people.

In other words, you are not alone.

Let’s define “model number.”

It’s the number or letters, or combination of the two, given to the exact style of your grill. This means there may be hundreds or thousands of the same model grill made and sold. This is the reason replacement companies use model numbers to sell parts. All the grill of the same model will use the same parts. Usually, there is a certain way each manufacturer uses a model number. The manufacturer Nexgrill has seven digit numbers that start with a 7 and are written like this: 720-0061, while Brinkmann starts with an 8 and look like this: 810-2700. Charbroil also uses all numbers but always starts with a 4 and is nine digits long – 463240904.

Now, buckle up because it doesn’t get more simple from here. There are also a lot of manufacturers that use letters in their model numbers as well. A very common one is Member’s Mark. Their model numbers look like this: Y0202XC.

That’s basically how model numbers are structured. Every manufacturer uses a different system so they always know exactly which grills are theirs.

Do you see a LP or an NG hanging off the end of your model number? Nothing to worry about, that just denotes the kind of gas your grill uses. LP stands for Liquid Propane while NG means Natural Gas. Sometimes the LP or NG is a part of the model, sometimes not.

So, how do you find this model number? That’s a little trickier.

First, try looking on your original owner’s manual. Usually the model number will be listed on the bottom of each page.
(I know some of you are looking at the screen in disbelief at the idea you’d still have that old grill manual. Ok, read on)
Some grills have small metal plates or labels with certification information on them, including your model number. These plates are usually on the back of each grill.
Can’t find it on the back of the grill? Did you look down really low? Try inside the door, on the side of the control panel, under the control panel.

You found a serial number!? Yahoo!!! That’s not the same as a model number and no one lists parts using serial numbers. Sorry. Keep looking.

Still nothing? Or you found it but can’t read it? Well, that’s alright. You don’t have to dump your grill yet. Just measure the parts you need to replace and call 678-272-2451.

Someone will help you.

Stay tuned for tips to get accurate measurements and therefore, THE RIGHT PARTS!!

Toodles. -GG

Originally published Oct. 1, 2012.

What is a Drip/Grease Tray/Pan? Where can I get one?

Posted on June 9, 2021 by Grill Girl

What is the bottom part of the grill called?

The bottom of the grill is called a grease tray / drip pan. It is a separate part in some grills that catches the grease and drippings from the delicious food you cook on your gas grill. If you have a little cup that catches all the grease, that is called a grease cup and count yourself lucky. They are easier to empty, clean and replace than an entire grease tray.

Example of a Grease Tray / Drip Pan

After a few years of use, a lot of grill owners find the grease tray / drip pan is rusting and failing to do its job. This results in greasy gas tanks and become a fire hazard. So, what to do? Easy – replace it. Right?

HOW CAN I REPLACE THE GREASE TRAY / DRIP PAN?

To see if we have a grease tray / drip pan for your gas grill, visit GrillPartsSearch.com, 1. Enter in the brand and model of your grill. 2. Press GO.

We now have a number of styles available. This is because you called us and let us know what you needed! Our response was to inform our suppliers and get the parts made.

We sell a variety of drip trays for Dyna-Glo, Member’s Mark, Vermont Castings and more!

Dyna-Glo Drip Pans:

We have nine different Dyna-Glo grease trays. Find which size works for your gas grill.

SIZE	SKU
15-1/4″ x 28-5/8″	GPDP70011
15-13/16″ x 26-7/8″	GPDP70012
15-3/8″ x 20″	GPDP10404
15-3/8″ x 33-1/2″	GPDP70013
16″ x 26-1/8″	GPDP10604
16″ x 28-1/8″	GPDP10504
7-1/8″ x 19-1/4″	GPDP10204
7-1/8″ x 26-3/8″	GPDP11304
7-1/8″ x 30-3/8″	GPDP15304

Member’s Mark Drip Pans:

We have two different member’s mark grease trays:

Vermont Vastings Drip Pans:

We have four different vermont castings grease trays:

If you need a different part than the ones listed above or are in a jam, here’s our best suggestion: You MAY be able to line your original rusty grease tray with one of those aluminum baking pans from a local grocery store. The cost is low and they are easy to find and manipulate into place.

Good luck, and remember, if you need any burners, heat plate, cooking grids, accessories….contact us!

PHONE: We’re open 9:00 AM – 5:00 PM, Mon-Fri EST. Call (678) 272-2451
CHAT: On the bottom right window, chat with us online 9:00 AM – 5:00 PM, Mon-Fri EST
EMAIL: We’ll get back to you same or next business day.

Happy Grilling!!!

-GG

Why Isn’t My Grill Getting as Hot as it Used to Get!?

Posted on April 24, 2014 by Grill Girl

Why isn’t my grill getting as hot as it used to get?

This is one of our most frequently asked questions.

For starters – is there gas in your tank? Check that first. 🙂

Once you know you’re cooking with gas, if you use propane (aka LP), the answer is almost always one of the easiest and cheapest things to fix : your gas regulator. Regulators go bad over time, slowly shutting down the amount of gas getting to your grill. That’s why it might not seem like something “broke” all the sudden, but there’s still an issue with the heat in your grill.

Gas grill liquid propane regulators (they fit on those 20lb tanks you buy/trade at grocery stores or gas stations) are a standard part. That means, in almost every case, you can use the regulator we sell for the grill you have. (If you’re not sure, give us a call)

Here’s the standard one-hose-fits-most grills regulator:

Does your grill have two hoses? or a place the the hose goes into a Y shape? We have that too!

How about a really big grill with 4 or more burners?

Or a grill that needs an extra long hose to reach to where the tank sits?

When you order this part and it arrives, you can simply unscrew the old regulator from your tank and your grill. Then screw on the new regulator to your grill and your tank.

See? I told you it was easy to fix.

Why not just go get a new one at a big box store? Well, not all parts are created equal, and we strive to supply the best quality available. We stock regulators in high quantities, so they should always be ready to ship out as soon as you place your order. If they aren’t, you’ll see that listed directly on the website.

We’ll save you a trip now by sending this part directly to your front door, and a trip in a year, because our parts outlast the generic ones sold at big box stores. (More questions about regulators? Read this post)

Still having issues with the heat in your grill? Check out this page for valve information.

It might be your grill burner.

And as always, if you have ANY questions give us a call! We specialize in Great Customer Service! 877-244-0737

-GG

How to Find the Model Number on Your Gas Grill – w/ Video

Posted on March 14, 2014 by Grill Girl

Hey Y’all! Grill Girl Here to Help You Find Your Gas Grill Model Number!

Today we’re going to be finding the model number on a Charbroil 463268606.

You can use these tips to find the model number on most types of grills. And don’t worry – if you can’t find the model number or the number is illegible, we can still help you fix your grill.

On grills with front doors, the best place to check first is inside the doors. If the model number isn’t there, try going around the back of the grill.

You’ll be looking for a label or sticker that has tiny print. Usually the model number will be listed along with certification information and maybe even a serial number.

We’ve also written post about how different manufacturer’s format their model numbers so you know what to look for. You can find that post here: What’s a Model Number?

Thanks for watching!!

-GG

Thanks to RutgerMuller for our beats!

Replacing the Heat Shield – with Video

Posted on March 14, 2014 by Grill Girl

Hey Y’all! Grill Girl here!

Today we’re going to be replacing the heat shields on Charbroil 463268606 grill.

You will notice it’s time to replace the heat shields (or heat plates, vaporiser bars, flavorizer bars) when they are rusting excessively or have areas that have rusted through, leaving holes. In this case, we could bend the heat shield in half, it was so rusted.

This is a very simple job and usually all you have to do is lift out the old heat shield and set in the new heat shield.

Notice there used to be a peg in the casting of the grill that has rusted away to nothing. You can just rest the heat shield on the casting of the grill. It is still far enough away from the burner that no flames will touch it.

We used a stainless steel plate to replace the original porcelain coated plate. The stainless steel will long outlast the original.

Look at that pretty, shiny new stainless steel part!

Thanks for watching! -GG

Thanks to RutgerMuller for our beats

Manufacturer Highlight: Charbroil

Posted on February 3, 2014 by Grill Girl

Charbroil Grills – The Highs, The Lows and how to keep yours running

: Looks yummy right?

Char-broil is one of the oldest grill companies that is still in business today. The grills they build range from cheap to expensive, basic to fancy. They sell grills in big box stores like Home Depot and Lowe’s. This makes the grills very accessible and popular. However, because of their contracts with these huge retailers, Charbroil has to get a grill available to the public at a very low price point. Stainless steel is very expensive and still going up in price. To combat the high price of stainless, manufacturers will use thinner stainless steel and/or a lower quality of stainless steel. This is why many parts rust out in 1-3 years of use and need replacing.

What does that mean for all of us? Basically that there are a lot of different models numbers and a lot of different replacement parts available. When you know that you might need Char-Broil burners, cooking grids, heat plates, briquette grates, carry-over tubes, or knobs, it can seem very overwhelming. The good news is that we are dedicated to making your search for replacement Charbroil gas grill parts as easy as throwing a steak on the grill!

This is how we do it; every year we get new parts for Char Broil grills, like burners, cooking grids, heat shields, and carryover tubes. Then, we do research on your grill model numbers using the online manuals, grill sizes, and information from Charbroil directly. This allows us to show the exact parts for your model number. We have a drop down list that includes every Char-Broil gas grill model number we know and list those parts we sell for each. We also include our phone number so if you don’t easily find the parts or model number, you can call us and we’ll do our best to dig up the dirt on your grill and the Char-Broil replacement parts you need.

There is a great selection of high quality parts for Charbroil gas grills available on our website, including new stainless steel burners, carry-over tubes, and cooking grids that were added to our line this year!

We list parts for Char-Broil Advantage Series, Commercial Series, Performance Series, Designer Series, Front Avenue, Masterflame, Precision Flame, Powerhouse and Big Easy burners and heat plates too!

We even have parts for the Infrared and Quantum Infrared Grills. The Quantum Infrared Series grills made it into the number 4 spot of a top 10 list for 2013. We have parts for all three Quantum models sold by Charbroil: 463270610, 463270909, and 463271310.

Click CHAR-BROIL to get started, or give us a call at 877-244-0737.

Visit GrillPartsSearch.com’s profile on Pinterest.

How to Find Your Grill Manual Online

Posted on June 10, 2013 by Grill Girl

Wondering how to find your grill manual if you misplaced the paper copy?

As you pull your beloved grill from its winter storage, you may find yourself with some uncertainties. Did this part always look like this? How do I clean this? When should I replace that? You might try to find your grill manual only to discover…you’ve misplaced it. Then again, you might know you’ve never had one or lost it years ago.

I think cities and states across the country are FINALLY ready to start grilling. Of course, I’ve been grilling since January, but you know, I’m kinda weird.

Most grills are fairly simple and straight forward. With a little bit of time, patience and maybe a measuring tape you can solve most grill dilemmas. But we live in an age of convenience and there are a few time saving resources to help you out when your manual has gone missing.

A lot of times you can find your grill manual online in a .pdf format. This might be available from your manufacturer directly, or from another third party manual supplier. A quick online search of the brand name and the word “manual,” or the extension “.pdf” should bring up the correct site.

However, we now offer a manual printing service. The cost is $14.97 which includes postage. You need to provide your model number and grill manufacturer. We will do all the searching for you. If your manual is available, we will find it!

Then, we print it, bind it and ship it to you. Voila!

Beware of independent manual sellers on Amazon.com. We do not recommend purchasing through these dealers. These manuals may be outdated or in poor condition. The seller may have made a mistake and listed the manual under the incorrect model number even the incorrect brand. In other words, ordering a grill manual through a third-party source is your riskiest option.

And even if your manual is no longer available anywhere, we can also help you troubleshoot some issues with your grill.

Shoot us an email [email protected] or call 678-272-2451 with your questions!

We’re here to get you back to grillin’, manual or no!!

-GG

Visit GrillPartsSearch.com’s profile on Facebook.

Repair Your Gas Grill or Replace It?

Posted on March 26, 2013 by Grill Girl

Are you trying to decide if you should repair your gas grill or replace it all together?

As a grill part guru, I tend to lean toward replacing everything in your grill as long as possible. This keeps the grill you love in your backyard and out of a landfill.

However, there are times when even the best grill needs the ol’ heave-ho. (If you have to replace your beloved grill, do it a favor and get something worthy to fill the empty spot on your patio)

Here are a few things to keep in mind.

**If you open the hood of your grill and it looks gross, REPAIR!! (or even, just clean!)

**If your cooking grids, heat plates, or burners are rusted, REPAIR!

**Knobs, ignition parts, regulators, handles are all easy fixes: REPAIR!

**If your valve system is bent or broken, you will need to find a replacement valve to REPAIR your grill. However, sometimes valves are no longer available. You cannot use the wrong valve for your grill, so I recommend at that point: REPLACE.

**Major damage to the main body of your grill requires you to REPLACE it. This includes the hood of your grill.

**If you have a grill mounted in the ground with a post that requires a new post, REPAIR!! You can buy a new post and save your grill!

Checklist if you should repair your gas grill or replace it

If you have any specific questions, feel free to leave me a comment and I’ll answer as quickly as possible!

You can also call 678-272-2451 for friendly help to repair your gas grill and all things grills!

-GG

(Is it warm yet!? Gracious!!)

The Gas Grill Burner

Posted on March 23, 2013 by Grill Girl

The Gas Grill Burner – What it it and how to find a replacement.

Once I had this conversation with a customer:

Customer: “Hi I need something but I don’t know what it’s called. It’s a long tube where the fire come out?”
Me: “Oh, yes! The burner?”
Customer: “Um, hmm, no. It’s not the burner. It’s this long tube with holes in it and it’s where the fires comes out to cook the food…Well maybe that’s the burner, I don’t know.”

Let me assure you all.

Yes.

That is the burner.

So what is a gas grill burner?

Our customer described it pretty well. Not all burners are tubes, but all gas grill burner have holes where fire comes out to cook your food. There are many different styles of burners. Grill manufacturers often use this part of the grill to differentiate themselves from other grills. Some of the most common styles of burner are H, oval, tube, rail.

Gas grill burners can be made out of stainless steel, steel, cast iron, brass and even have ceramic elements.

If you don’t have a model number for your grill (see previous post), you can use your original burner to find the correct replacement. You will, however, need to take the burner out of your grill to get the best measurement. You’ll need to be able to describe what the shape of your burner is and the dimensions of it.

So, just remember, it’s the thing in your grill where the fire comes out. THAT’S the gas grill burner.

Happy grilling!!

-GG

What Do I Need to Know About Gas Grill Regulators?

Posted on March 13, 2013 by Grill Girl

What are gas grill regulators and do you need to replace yours?

The term “regulator” is usually used in the grill world to describe the gas grill regulators, hoses and fittings that bring gas from your LP tank and connects it to your grill.

Technically, the regulator is the silver colored disc part that looks like this:
Gas Grill Regulators

The hose connects it to the brass fitting which is the part that screws onto your grill. Right next to the regulator is a collar that twists freely. That’s the part that screws onto the LP tank. Though you should always turn off your LP tank when you’re done cooking or when you’re changing the regulator, LP tanks are made with an automatic shut off valve. It will only work when a regulator hose is connected to it.

How do you know when it’s time to replace your regulator?

As I mentioned, the regulator brings gas to your grill burners. Here are some indicators you need a new gas grill regulator

Low heat coming from your burners when your gas is turned on high. Do a visual check on your burners to make sure they are all in one piece and there are no obvious holes or problems.
Your burners light up unevenly. For example, if the burner on the far right flickers or hardly lights, the middle burner has low flame, and the left burner has a normal looking flame.
Over time your grill gets less and less hot. Last week it took 10 minutes to grill some burgers, but today it took 15 to grill the same burgers.

WHY? Regulators, for safety reasons, close down slowly over time as they “go bad.” You probably won’t notice one day your grill is perfect and the next it doesn’t light at all. The burner closest to the source of gas will light up better than those farther down the manifold. Your grill will get to lower and lower temperatures over time, even on “high” heat. The main indicator of needing a new regulator is low heat or low flames, especially if it’s getting worse over time.

What else could go wrong?

Keep in mind that you may also have a problem running along the hose. Be aware of the smell of gas even when your grill is off or a tiny hissing sound.

Some animals like to chew on the sun-baked rubber hoses. (Don’t knock it ’til you try it?) If this is a problem for you, they have invented handy-dandy hose guards. Check them out.

If you think there’s a leak, but you’re not sure, you can check the hose with some very soapy water. Rub the suds all the way along the line of the hose. Turn on the gas tank. If there is gas escaping, it will cause the soapy water to bubble at the point of the leak.

What are the differences in gas grill regulators?

A single-hosed, standard regulator is the most commonly used part on grills. It’s the picture I used above. These regulators let out up to 60,000 BTUs of gas.

If you have a side burner, check out this dual-hosed standard regulator. There is one regulator (remember that’s the disc) and there are two separate hoses. Sometimes one hose comes off the regulator and splits into two hoses, forming a Y shape, and sometimes there are two hoses coming directly out of the regulator itself. Either will work and they are interchangeable.

Updated June 2021: Many of our gas grill regulators now support high-flow needs (let out up to 90,000 BTUs of gas). These are compatible with grills that originally used a standard flow. However, please note that your high setting might give you more heat than before. Pay attention the first time you grill with a new regulator and take note of the cook temps!

How do you know?

Usually, the removal and visual inspection of your regulator determines which replacement you need. It’s also a good idea to measure the existing hose and/or the space a hose needs to stretch to reach from the tank to the valve or manifold. If you’re not sure, call 678-272-2451. The staff at GrillPartsSearch.com is always happy to help.

Special Cases

Keep in mind, a standard regulator and hose will not work if you have:

Natural gas grill (NG)
A crimped hose onto the valve or manifold in your grill. You will know because you won’t be able to unscrew the hose from your grill. In this case, you need to contact your manufacturer to replace the entire valve system.
Male fitting on the end of the hose that connects to the grill.
Hose fitting larger or smaller than a 3/8″ flare, which translates to about a 5/8″ inner diameter measurement of the opening at the end of the fitting.

Here’s a picture of the fitting:

You can’t measure the 3/8.” It’s confusing, I know. Like I said, check for a 5/8″ measurement.

The good news is that this can be the easiest, cheapest part of your grill to fix!

Remember, not all regulators are created equal. Lower quality rubber will degrade and break more easily in the sun. A lower quality regulator can go bad more quickly.

(This theme came from our FAQs. Let me know if you have a question in our comments section and I can answer it there or even write a blog for you!!)

Spring is coming!!!
-GG