Tag Archives: manufacturer

How Do I Replace My Gas Grill Rail Burner? – with video

Posted on by
2

Hey Y’all!! Grill Girl here! Today, we’re going to be changing the gas grill rail burners on a Brinkmann Pro Series 2400.

This blog on replacing gas grill rail burners updated June 2021. Call us for help with your grill 678-272-2451!

This how-to video will relate to any brand of grill that uses cast iron rail-type burners, like the one in this photo:

Grill with Rail-Style Burners

Gas Grill Rail Burner Replacement

  • The first step to replacing your old grill burners is to remove the cooking grids and heat plates covering your burners. Once you have done that, your grill should look similar to the one in the above photo.
  • Remove the hitch pin from the burner bracket to loosen the burner itself.
    **The hitch pin connects the burner to the burner bracket to holds it in place. It feeds through a little knot on the underside of the burner. The easiest way to remove it is by using needle nose pliers.
  • Now the burner is free at the back end, but still connected through the steel plates in the front of your grill.
    **In the case of rail-type burners, the burner is not attached to the valve, it simply fits over the valve. The valve system is right behind your knobs on the front of your grill, so if you want to make sure there’s nothing else connected to your burner, you can kneel down and look under the knobs and face plate of your grill. You’ll see the burner fit over the valve.
  • Once nothing is holding onto your burner, lift up the back end and pull!!!
    **It’s okay to use a little force. I had to!! This is a gas grill we’re talking about here, not a china cabinet.

**IF YOU DON’T KNOW WHICH GAS GRILL RAIL BURNER YOU NEED AS A REPLACEMENT, YOU CAN MEASURE IT – NOW THAT YOUR OLD BURNER IS REMOVED, YOU CAN MEASURE THE ENTIRE LENGTH AND WIDTH OF IT.**

  • With your brand new burner in hand, slide the venturi, or tube-looking, end back over the valve at the front side of your grill.
    **Make sure to guide the tube over the valve of your grill. You may have to kneel down again to make sure it fits over properly. This is how the gas gets into your burner.
  • Rest the back end of the burner on the bracket and put the nub into place.
    **There should be a little hole on the bracket where it fits in.
  • Place the new hitch pin into the nub under the bracket to hold the burner securely in place.

That’s all there is to it, folks!! Again, this tutorial will work for any rail-style burner, but for those of you who want specifics here they are, all linked up if you need parts:

Brinkmann models that use the rail style burner

The grill in the video: Brinkmann Pro Series 2400, model number 810-2400-0.
Other models that use three of the exact same burner are:810-2235-0,810-2200-0,810-2210-0,810-2210-1,810-2250-0,810-2250-1,810-2250-2,810-2300-0,810-2300-B,810-2310-0,810-2310-1,810-2320-B,810-2400-2,810-4345-0,810-6305-T,810-6355-T.
The parts used in this video were the burner CITL, and the burner bracket (no longer available), and were provided courtesy of GrillPartsSearch.com.

You can do it!!! -GG

Visit GrillPartsSearch.com’s profile on Facebook.