BLACK HI-TEMP PAINT
Refresh the look of your barbecue with a smooth, black coat of hi-temp paint that has been specifically made for reconditioning most gas, electric, and charcoal BBQs. Formulated with extra silicone for superior protection and coverage.
- Suited for heat up to 1200˚F (648˚C)
- 12 oz. aerosol spray can
- For use on the outside of grill only
- > DO NOT USE ON HOT GRILL OR GRILL IN OPERATION
- > USE IN WELL-VENTILATED AREA
INSTRUCTIONS
BEFORE PAINT PREP WORK
- The surface must be free of grease, rust & wax
- Use degreaser spray to remove grease before painting your grill
- Mask off or protect areas from overspray
- Allow can to warm to room temperature before use
- SHAKE can until metal ball rattles, then continue to shake for at least two minutes. When it stops rattling, you have shaken it up completely.
PAINTING
- Move can with smooth, even, dusting strikes, letting paint become tacky between coats
- Only apply enough paint for coverage; excessive spraying may result in runs
- Never spray with the valve partially open; press the spray tip all the way down
- If spray stops or becomes irregular, rotate spray head from side to side without removing from the valve. This will usually clear the spray head.
- After use, invert can and spray for 2-3 seconds to clear the valve and spray tip before storing